![]()
![]()
![]()
Product Introduction
XJ01 is a novel zoomable flashlight with USB charging and discharging function. Aircraft-grade aluminum body with Type-C Charge, hard anodizing, anti-scratch and impact-resistant. It uses the high performance JH-90 white laser Led, equipped with an EAGLE-EYE optical lens. This flashlight can be fully zoomable from wide to narrow beam just by stretching the torch head only. It can perfectly balance the floodlights and spotlights. This super bright flashlight is powered by a single larger capacity 26650 rechargeable battery. Easy to operate, just by clicking the switch can change different modes. Hidden USB charging and discharging design, dust-proof and waterproof. Digital screen power display, easy to know the battery status. XJ01 flashlight is the perfect partner for outdoor, camping, searching, adventure, mountaineering, hiking, cycling, power outage, disaster prevention, emergency and etc.
Flashlight Features:
◎ Hidden USB charging/discharging design
◎ 5 modes to meet different illumination demands
◎ Zoomable by stretching the flashlight head
◎ Perfectly balance the floodlights and spotlights
◎ Digital screen power display:
① The number displayed is 20%-100%, indicating that the battery is sufficient.
② If the displayed number is below 20%, it means low battery.
◎ Circuit with overcharge protection to extend battery life
◎ Gold plated internal contact points for reducing resistance
◎ Anti-slip design for preventing the flashlight drop accidental
◎ Equipped with lanyard, easy to carry
◎ IPX67 Waterproof standard, dust-proof and impact resistant
◎ Tail can be stand as a candle, convenient illumination
◎ There are 2 light rings on the head of the flashlight, which can emit light in the dark night after absorbing
light, making it easy for you to find the location of the flashlight.
parameters:
◎ Led: JH-90 white laser LED. Life span up to 100000 hours.
◎ Battery: 1*26650 rechargeable lithium ion battery.
◎ Battery capacity: 5000 mAh.
◎ Working voltage range: 2.7- 4.2V
◎ Charging voltage current: 5V/2A
◎ Discharging voltage current: 5V/1A
◎ Material: aircraft-grade aluminum with anti-abrasive finish, durable and anti-resistant
◎ Weight:400g (excluding the battery)
◎ Dimension: 180mm (L)*55mm (Head D)*37mm (Tail D)
Package includes:
◎ 1* flashlight
◎ 1* 26650 rechargeable battery
◎ 1* AAA battery holder
◎ 1* 18650 transparent cylinder
◎ 1 * Type-C USB cable
◎ 1* Lanyard
◎ 1 *User guide
Operation
1.Battery installation
◎Unscrew the flashlight tail cap and insert the battery in the correct direction. The(+)terminal on the batteries should face toward the flashlight's head.
As shown in the following figure.
The correct installation method: The(+)terminal on the battery should face toward the flashlight's head.
2. Flashlight turning on
◎Press the side switch on the head to turn on the light(default high mode)
3. Output Selecting
◎ There are 5 types of output.(High→Middle→Low→Strobe→SOS)
① Lightly press the side switch (one click) to change the modes(High→Middle→Low→Strobe→SOS)
② It can be turned off directly via press the button for more than 3 seconds
Charging Operation &Indicator:
1.Hidden Type-C charging design. Extend the flashlight head to expose the USB port, then insert USB
cable to charge.
2.Charge Time: About 2-4 Hour
3.Indicator lights:
The digital display screen displays numbers from 1% to 99%, The IN letter in the upper right corner indicates that it is charging, The letter IN disappears, and the number shows 100% to indicate that the charging is complete.
Discharge output operation and indicator:
1. Hidden USB discharge design, stretch the head to expose the USB discharge port, then insert the
USB cable for power output (5V/1A). The other end of the USB cable to connect the device that needs
to be charged.
2. During USB power output, when the power is enough, the screen will show 20-100%, and when the
power is insufficient, the screen will show less than 20% power, you need to charge.
Intelligent Power Indicator Function：
During the flashlight usage, When the power is sufficient, the screen will display 20-100%, and when the power is insufficient, the screen will display less than 20% power. Please charge or replace the batteries in time.
Usage and Maintenance
◎ Please don't disassemble the sealed head, doing so can cause damage to the flashlight and will void the warranty.
◎ Please use batteries of high quality or the flashlight could be damaged by electrolyte leakage or battery break.
◎ If the flashlight will not be used for a long time, remove the batteries to avoid damage from battery leakage.
◎ When the flashlight is not used for a long time, charge and discharge normally every 3 months to ensure the normal operation of the battery and extend the battery life.
◎ Please clean the contacts of your light from time to time, especially if the light flickers or doesn't light up.
Troubleshooting Method
There may be several reasons for light that is not working or charging properly when first use.
Reason A: The transparent plastic protective film on the battery was not removed before using, which leads to the insulation of the positive and negative electrodes of the battery.
Solution: Remove the transparent plastic insulation protective film on the battery surface and reinstall the battery.
Reason B: The positive and negative poles of the battery are installed upside down.
Solution: Please make sure that the batteries are installed correctly according to the positive and negative terminals.
If the above measures still do not work, please contact your dealer and refer to the warranty regulations.
Product Warranty
This product has passed the strict quality inspection. In case of failure due to product quality problems under normal use, we will provide a free warranty within the warranty period. If it is artificial damage, we will charge the cost of parts replacement. The specific warranty scheme is as follows:
1. Within 30 days (including) from the date of purchase, if there is any quality problem of the product, it shall be returned and replaced unconditionally.
2. If there is any problem with the product under normal use, it shall be repaired free of charge within 12 months from the date of purchase.
Note：
(Fault phenomenon: the lamp is not on or can not be charged. Please troubleshoot according to the following methods)
1. There is a transparent insulating protective film on the battery surface.
Please remove the protective film when using for the first time.
2. The threads at the interface between the lamp head and the battery barrel
are not tightened well. Please tighten them.
Warning
◎ The is high-intensity lighting device and capable of causing eye damage, please avoid shining the light directly into the eyes.
◎ It is normal for the flashlight shell have slight heat during use. Because the heat of the lamp beads is emitted through the flashlight shell.
◎ This flashlight is waterproof for life and can be used outdoors in rainy days, but please do not soak the flashlight in water.
Customer Service:
Customer satisfaction is our pursuit. If you have any problems during the use, please feel free to contact us. Please provide your purchase order number and product picture when contacting us. Because there are too many kinds of goods, we can't find the goods that need to provide services quickly and accurately without the order number. We will reply and help you solve the problem within 24 hours.
Recon Tactical Products
Email admin@kitbag.com.au
www.kitbag.com.au
